• Double ended bits are basically two bits in one • Convenient bit can be flipped around for a fresh sharp bit when drilling panels for Cleco fasteners or rivets • Available Sizes: 1/8" or 3/16" • Package of 6
• Heavy duty handheld rivet tool • Includes interchangeable nose pieces for 3/32", 1/8", 5/32", and 3/16" diameter rivets • Easily serviced by removing retainer screw to clean or replace jaw • Grooved handle for easy grip
• Heavy-duty handheld cleco pliers • Unique tool easily installs and removes Cleco pins
• Grommets are perfect for protecting wiring and hoses that pass through panels up to 1/16" (.062") thick • Kit includes 36 grommets • Includes 6 grommets of each size: 1/4", 5/16", 3/8", 1/2", 5/8" and 11/16"
• Body radius tool • Solid oak tool can be used to flare edges of wheel openings when fabricating fenders and quarter panels out of aluminum • Tool has two different radiuses to create the correct flare for your needs
• Specially hardened drill bit is required for drilling spring steel • 17/64" size simplifies installation of 1/4" hardware • Sold each
• Tool aggressively shrinks sheet metal • Great for forming curves in hoods, fenders, A-pillars and more on the bodies of race cars • Designed for an aggressive shrink on a double fold 90 degree bend • Will shrink hemmed edges of .040 aluminum • Ratio of the vise grip makes easy work of the double folds
• Move cars easily to make more room in garage or race shop. • Dollies have rounded lower sections to safely cradle each tire. • Steel dollies are 14-1/2" wide x 23-1/2" long with standard casters for use with cars up to 4,000 lbs. • Dollies are sold per pair. • Ratings stated are when using a combined set of four same wheel dollies
• Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles. • Also works on trailing arms and suspension tubes when used with ALL10740 Smart Tool Tray. • A "hold" button freezes and unfreezes readings which can be displayed as degrees, percentages, or in./ft. at the push of a button. • Plus and minus signs indicate when pitch is more or less than that shown on the display. Pitch reads in 1/8 in./ft. increments. • Listen and level emits an audible "beep" at level and plumb. • The tool shuts off automatically if idle for more than six minutes. • Powered by a standard 9 volt battery
• Aluminum plates simplify setting of toe-in and toe-out. • Plates fit against outside edges of tires. • Using two tape measures (sold separately), measure the distance front and rear, between plates. • The difference in tape readings is the toe setting. • Standard plates are 1/2" thick, 11" tall x 32" wide and work well for vehicles with larger wheels and wheel openings. • Set of two plates.