Safety - Neck Restraint

The foundation of the Impact Rev is its patent pending Tension Neutralizing Tether design which minimizes interference between the seat and the helmet while improving comfort, and reducing weight. The Impact Rev exemplifies simplicity and ease; key factors in getting drivers to actually use their safety equipment!

• Features include a quick release system, allowing for a quick eject of the tethers from the helmet
• Integrated belt guides ensure the restraints stay put.
• Manufacturer's Certified to the SFI 38.1 Specification
• Patent Pending Tension Neutralizing Tether Design Provides Superior Lateral and Frontal Support
• Lightweight - Unnecessary Mass Eliminated; Unit Weighs Just Over 1 Lb
• Comfortable - No Interfering Yoke and Features Padded Comfort Foam
• Design - Allows for Quick Ingress and Egress from Race Vehicle
• Ergonomic - Little to No Interference with Seat & Helmet
• Superior Construction - Manufactured from DuPont's Carbon Fiber Composite Materials for Strength
• Impact REV Works in Any Race Car and With Every Seat Angle
• Available in Small, Medium 2", Medium 3" or Large
• Made in the USA

** FREE Gift Card PLUS FREE Shipping **

The HANS Pro Ultra is SFI 38.1 approved and FIA certifed. The Pro Ultra device applies lightweight construction of the Carbon Fiber Pro series to the modern new shape of the Sport II. The Ultra saves on weight and allows for easy entry and exit from the race car, even smaller tighter vehicles. The 100% carbon fiber construction features a hollow core for increased weight reduction without sacrificing strength. The sliding tethers offer exceptional viisibility. Upgrade to the Pro Ultra today.

• Hand made with high modulus carbon fiber
• Works with 20° Layback Seats
• Hollow core reduces weight
• Weighs about 1 pound - the lightest HANS Device
• SFI 38.1 and FIA Certified
• Rounded collar allows easier entry/exit of the race car if still attached to helmet
• Weighing a slight 1 lb. heavier than the Professional Series HANS
• Medium fits neck sizes 13 1/2 to 17 inches
• Large fits neck sizes 16 inches to 20 inches
• Simply choose your preference of anchors - post anchors or quick clips
• Everything you need to connect the HANS to your helmet, including instructions and tools, will be in the box

** FREE Gift Card PLUS FREE Shipping **

• The HANS III represents the third generation of injection molded HANS devices and features a contemporary approach to reducing weight.
• Using an all new design and polymer, the device features a hollow collar that substantially minimizes weight.
• Engineered reinforcements ensure an exceptionally strong structure that provides the same level of safety as every HANS device.
• The reduced mass guarantees the lightest and most comfortable injection molded HANS ever.
• SFI 38.1 Certified
• Choice of sliding post collar or quick click anchor tether
• Option for SA or SAH certified helmets
• Available in 20 Degree Medium or Large

The new Series 2A has new features never seen before in the Head and Neck Restraint market. These new Patent Pending Features include Advanced Axis Adjustment allows you to adjust shoulder width, arm angle and arm width. Fits different body shapes and sizes and adjusts to different race seats.

• Super Lightweight at approximately 900 grams.
• Extremely Comfortable feels like you have nothing on.
• Dual Compound Frame Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics.
• Arms made with a Modified Alloy material give the device a dampening characteristic in a crash.
• Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength.
• Kevlar Webbing Single Point Tether connects helmet to restraint and offers good side to side motion during use.
• 02 Spring Clip Quick Connect makes it even easier to disconnect the device from the helmet.
• Belt Channel with Wings accepts 2” or 3” belts.
• Replaceable Padding is easy to clean and/or replace for continued comfort.
• Helmet Hardware needed is included to connect to helmet.
• SFI 38.1 Certified

The REV 2 LITE is the ultimate head and neck restraint. Weighing in at only 1.2 lbs. / 550 grams, the REV2 LITE carries the same level of protection and certifications as the NecksGen Original and REV devices. The REV2 LITE has all the same features as the REV, but adds a clever new adjustable tether system, rubber grip friction pads to help you feel locked in your seat better, higher belt guides to keep everything locked in place and for multiple impact situations. The shoulder pads are improved, and as an exclusive new feature, the REV2 LITE comes with free recertifications.

• Small 2"
• Medium 3" (most popular size) fits necks up to 6" wide
• Large 3" size fits necks up to 7" wide
• SFI 38.1 certified
• 16 x 10 x 5 in.

• Z-Tech Complete Helmet Anchor Kit
• For use with Z-Tech Series 1A or 4A Restraint Systems
• Available in Silver
• Sold in pairs

• HIGH-Back provides more natural pull angle and easier side to side movement
• Advanced Axis Adjustment allows you to adjust shoulder width, arm angle and arm width
• Super Lightweight at approximately 925 grams
• Extremely Comfortable feels like you have nothing on
• 02 Spring Clip Quick Connect makes it even easier to connect or disconnect the device from the helmet
• Dual Compound Frame Fiberglass Reinforced Nylon is used for the shoulder frame
• Arms made with a Modified Alloy material give the device a dampening characteristic in a crash
• Stainless Steel Hardware screws and binary post provide long lasting strength
• Kevlar Webbing Tether connects helmet to restraint and offers good side to side motion during use
• Belt Channel with Wings accepts 2” or 3” belts
• Replaceable Padding is easy to clean and/or replace for continued comfort
• Helmet Hardware needed is included to connect to one helmet.
• SFI 38.1 Certified

The Hybrid Sport with is lightweight design and DuPont® carbon/polymer construction provides maximum comfort and maneuverability with superior strength. Hybrids come race ready. The trusted low profile design disappears into the seat when worn and allows for easy in and out of the race car, eliminating the danger of becoming caught in other gear. The protection stays with the racer during multiple impact, flips and rolls.

• SFI 38.1 certified
• Patent pending multi-tether system to enhance side to side movement
• DuPont® carbon polymer construction
• Made in the USA
• Sleek, modern profile with defined wings for seat belt containment