Shopping

• Electroless nickel plated body completely seals for corrosion resistance, superior hardness, consistency & lubricity
• Linear, Digressive & Low Speed Super Digressive valving
• Racer revalveable & rebuildable
• Tuneable gas pressure
• Premium proprietary blend of specially engineered oil prevents fading
• One-piece body design
• 46mm large diameter piston for maximum control at all shaft velocities
• 15mm centerless ground, hard chrome plated piston rod
• Deflective disk valving allows control of suspension at low shaft speeds without creating extreme forces at high shaft velocities
• Can run upside down with no rate change to reduce unsprung weight
• Replaceable 1/2" I.D. bearings
• Custom valving available

NOTE: Click on the 26 Series Shock Product Download below for technical data.

** On Sale While Supplies Last **

QA stock mount shocks have been engineered specifically for circle track racing. Perfect for IMCA Southern Sport Mods! They are racer revalveable and rebuildable, just like many of our steel bearing mount and aluminum shocks. Now there is no need to keep throwing damaged or worn-out shocks in the trash. Due to deviations from the factory ride height, it may be necessary to check to static ride height of your particular application.

• Twin tube design
• Stock mount
• 2” O.D. steel body
• Precision machined piston with P.T.F.E. piston band
• 15mm centerless ground, hard chrome plated, solid piston rod
• Deflective disk valving
• Racer revalveable & rebuildable
• Linear piston
• 100% Dyno tested & serialized
• Dyno sheets available
• Custom valving is available

• IMCA legal - same as 26 Series but with gas pressure tuneability feature disabled
• Electroless nickel plated body completely seals for corrosion resistance, superior hardness, consistency & lubricity
• Linear, Digressive & Low Speed Super Digressive valving
• Racer revalveable & rebuildable
• Premium proprietary blend of specially engineered oil prevents fading
• One-piece body design
• 46mm large diameter piston for maximum control at all shaft velocities
• 15mm centerless ground, hard chrome plated piston rod
• Deflective disk valving allows control of suspension at low shaft speeds without creating extreme forces at high shaft velocities
• Can run upside down with no rate change to reduce unsprung weight
• Replaceable 1/2" I.D. bearings
• Custom valving available

For the ultimate shine, QA1 offers chrome plated 2-1/2" I.D. Coil Springs from 6" to 14" free length. QA1 springs are strong, consistent and have a long life because they are made with the highest quality materials. A lifetime guarantee ensures that all QA1 springs will remain within 5% of the original free height under normal operating conditions.

• Inner Diameter: 2-1/2"
• Free Length: 10"
• Finish: Chrome
• Rate/In: 115 to 600

For the ultimate shine, QA1 offers chrome plated 2-1/2" I.D. Coil Springs from 6" to 14" free length. QA1 springs are strong, consistent and have a long life because they are made with the highest quality materials. A lifetime guarantee ensures that all QA1 springs will remain within 5% of the original free height under normal operating conditions.

• Inner Diameter: 2-1/2"
• Free Length: 12"
• Finish: Chrome
• Rate/In: 95 to 550

For the ultimate shine, QA1 offers chrome plated 2-1/2" I.D. Coil Springs from 6" to 14" free length. QA1 springs are strong, consistent and have a long life because they are made with the highest quality materials. A lifetime guarantee ensures that all QA1 springs will remain within 5% of the original free height under normal operating conditions.

• Inner Diameter: 2-1/2"
• Free Length: 14"
• Finish: Chrome
• Rate/In: 125 to 250

QA1's AM Aluminum Series rod ends are male rod ends that are designed specifically for performance applications where weight is a concern. With a Teflon®/Kevlar® injection molded race, these rod ends are completely self-sealing and self-lubricating, keeping dirt and debris out. Over 10% lighter than traditional three-piece aluminum rod ends, the AM Series rod ends are the most wear-resistant aluminum design available.

BALL
• 52100 Bearing Steel
• Heat Treated
• Hard Chrome Plated
• Precision Ground
RACE
• Teflon®/Kevlar®
• Self-Lubricating
• Self-Sealing
BODY
• Aircraft Aluminum
• Color Anodized Red as Standard
EXCLUSIVE FEATURES
• Metal to Metal Support for Heavy Shock Loads
• Increased Cross-Sectional Thickness for Greater Tensile Strength

QA1's AF Aluminum Series rod ends are female endura rod ends that are designed specifically for performance applications where weight is a concern. With a Teflon®/Kevlar® injection molded race, these rod ends are completely self-sealing and self-lubricating, keeping dirt and debris out. Over 10% lighter than traditional three-piece aluminum rod ends, the AF Series rod ends are the most wear-resistant aluminum design available.

BALL
• 52100 Bearing Steel
• Heat Treated
• Hard Chrome Plated
• Precision Ground
RACE
• Teflon®/Kevlar®
• Self-Lubricating
• Self-Sealing
BODY
• Aircraft Aluminum
• Color Anodized Red as Standard
EXCLUSIVE FEATURES
• Metal to Metal Support for Heavy Shock Loads
• Increased Cross-Sectional Thickness for Greater Tensile Strength

Coil-Over Kits for your Circle Track Shocks. If you’re looking for a coil-over kit for your circle track application, you are sure to find what you need with QA1. Coil-over kits contain some or all of the following, depending on the application:

• Aluminum sleeve
• Spring cap
• Spring seat adjuster nut
• Wire ties
• Spring cap retainer pin
• Jam nut
• Snap rings

Kits include components for one shock.