Safety - Neck Restraint

The Hybrid Youth Sport gives you all the safety of an adult version, but 25% smaller to fit a junior driver as young as 4 years old. Lighter, sleek, modern and appealing with defined wings for seatbelt containment. With it's lightweight design and DuPont® and carbon/polymer construction provides maximum comfort and maneuverability with superior strength.

• Hybrid Sport Youth Restraint, Quick Release Tethers/SA2010 D-Ring Kit
• SFI 38.1 approved
• 20% reduction in weight over earlier models
• Patent pending multi-tether system to enhance side to side movement
• DuPont® carbon polymer construction
• Sleek, modern profile with defined wings for seatbelt containment
• Made in the USA

YOUTH SIZING: Age ranges are meant as a guide only
X-Small Child: 22-26" ages 4-6 (supplies with shorter 10" Fixed anchor)
Child: 22-26" ages 7-9
Youth: 26-30" ages 9-12

If you've ever gone for a long ride in a UTV, chances are you've found out the hard way exactly how heavy your head really is. The bouncing, bobbling, swaying for hours with a helmet on can strain your muscles, and cause soreness and discomfort. Designed purely with comfort in mind, this easy to use foam collar simply supports your helmet to help you keep your eyes on the road.

• Adult UTV helmet support/foam collar
• If you are racing, you need a head and neck restraint
• NOTE: This is NOT a head and neck restraint, and does not protect you in a crash
• When out for fun on trails or dunes, this support can help to stop the bobble-head effect
• Size Thickness: High = 2.5", Medium = 2.0" and Low = 1.0"

The REV2 Carbon is our highest rated head and neck restraint, and is currently the lightest one available. The Medium 2" tips the scales at less than 1 pound! The simple, small, easy to use design carries over from the popular REV2 Lite, and has the same level of certification and safety as all NecksGen head and neck restraints.

• The NecksGen REV2 Carbon head and neck restraint is their lightest!
• Adjustable tether makes setting your slack and range of motion quick and simple
• No need to worry about seat angles or fiddly chest straps, just put your belts on and go
• Available in sizes to fit most all drivers from teens and up
• Quick release helmet hardware is included

If you've ever gone for a long ride in a UTV, chances are you've found out the hard way exactly how heavy your head really is. The bouncing, bobbling, swaying for hours with a helmet on can strain your muscles, and cause soreness and discomfort. Designed purely with comfort in mind, this easy to use foam collar simply supports your helmet to help you keep your eyes on the road.

• Youth UTV helmet support/foam collar
• If you are racing, you need a head and neck restraint
• NOTE: This is NOT a head and neck restraint, and does not protect you in a crash
• When out for fun on trails or dunes, this support can help to stop the bobble-head effect
• Size Thickness: High = 2.5", Medium = 2.0" and Low = 1.0"

Known as the "Flat top", this is the current standard issue quick release helmet hardware set for your NecksGen Original and NecksGen REV devices. Comes complete with hardware to install in any type of helmet.

• NecksGen quick release helmet hardware
• Works with all NecksGen restraint systems
• Includes (2) M6-1.0 x 12mm bolts, (2) threaded helmet load plates to install inside any type of helmet, and (2) plastic backing plates (optional use)

The new Series 3A has new features never seen before in the Head and Neck Restraint market. Advanced Axis Adjustment allows you to adjust shoulder width. Fits different body shapes and sizes and adjusts to different race seats.

• Super Lightweight at approximately 750 grams
• Extremely Comfortable feels like you have nothing on
• Specialized Fiberglass Reinforced Nylon is used for the shoulder frame offering leading structural characteristics.
• Stainless Steel Hardware screws and binary post built with high quality and strength to provide long lasting strength
• Kevlar Webbing Single Point Tether connects helmet to restraint and offers good side to side motion during use
• VER.02 Spring Clip Quick Connect makes it even easier to disconnect the device from the helmet
• Belt Channel with Wings accepts 2in or 3in belts
• Replaceable Padding is easy to clean and/or replace for continued comfort
• Helmet Hardware needed is included to connect to helmet
• SFI 38.1

The Meru ASCENT is SFI 38.1 approved. The Ascent Carbon is the newest and best technology in the head and neck restraint market for concussion prevention.The device applies the industry changing Inertia Dampening System(IDS) to drastically reduce concussion causing forces without giving up any neck safety. The Ascent Carbon Brace is a full carbon head and neck restraint with stainless and aluminum hardware. A hydraulic shock absorber is built into the backplate of the device to help dampen head movement throughout the entire length of impact.

• Hollow Carbon Fiber Collar with non-slip belt grips
• Custom molded honeycomb infill padding with Nomex wrapped padding covers (Oversized for maximum protection)
• Honeycomb pattern allows pad to remain firm enough to maintain car-feel but enough give for comfort.
• Magnetic Locating Helmet Anchors
• Fire resistant kevlar webbing sliding tether with magnetic blended Stainless steel helmet mounts
• Hinged collar and headrest design with a hydraulic shock absorber
• Fully customized CNC’d dampener with proprietary IDS technology featuring speed sensitive valving to maximize both safety and comfort
• Moving headrest allows for universal use in all seating positions
• A near 80% reduction in concussion causing forces in a 70G Impact
• Hundreds of lbs under the SFI upper neck tension threshold.
• Works with all seating positions
• Weighs about 2 pounds
• All braces come with hardware including tethers, helmet mounts and carrying case