Helmet Accessories

EZ Tear system packaged with a pair of silver tearoff posts. The EZ Tear provides a shield for the folded tearoffs to keep you from grabbing them by accident. It protects the folded tabs and guides your hand to the top tearoff so you can get the full benefit of every single tearoff and ultimately keep your vision clear so you can focus on the racing and not fumbling with tearoffs. The EZ Tear is universal and attaches between the lens and the tearoff post and adjusts to accommodate the tearoff tabs on all brands of helmets and tearoffs.

The Aluminum tearoff post's are engineered for compatibility with the EZ Tear!

• 15% Taller than competing brands to accommodate more tearoffs
• Rounded top for easier tearoff installation
• Tapered sides for easier pulling
• 6061-T6 Aluminum for strength and durability
• #10 diameter fastener for extra holding power

Pulse Racing Innovations Tearoff Posts are 15% taller than other brands to accommodate more tearoffs. It has a rounded top for easier tearoff installation, and tapered sides for easier pulling. The Pulse Racing Innovations Tearoff Post is constructed from 6061-T6 aluminum for strength and durability, and uses a #10 diameter fastener for extra holding power.

• Engineered for compatibility with the EZ Tear!
• 15% Taller than competing brands to accommodate more tearoffs
• Rounded top for easier tearoff installation
• Tapered sides for easier pulling
• 6061-T6 Aluminum for strength and durability
• #10 diameter fastener for extra holding power

• Lightweight aluminum helmet hook
• Clamps on roll cage tubing and provides an anchor for attaching helmet strap
• Diameter: 1-3/4"

• Unique aluminum tear off posts have a second set-screw locking the posts to the shield
• Keeps posts from continually coming loose
• No need to remove shield just to tighten the tear off post!
• Package of two

Bell’s Pro V.2 Roller Bag is designed to allow racers to store their helmet, head and neck restraint device and other gear in a convenient, padded bag with handle and rollers for easy transport. The Hans Pro V.2 features a unique divider system allowing drivers to create separate storage areas for the helmet and device.

• Bag is vented and can also be used as one large bag without separate storage areas.
• External pockets allow for the storage of smaller items including hardware kits and other helmet accessories.
• Length: 26 inches
• Width: 17 inches
• Height: 15 inches
• Weight: 7.9 pounds

• Replacement shields for Roux SA2015 and SA2020 helmets.
• These helmet shields fit all Roux helmet styles.
• Shields available in Clear, Amber/Yellow, Dark Smoke, Light Smoke or Blue Irridium.

• Inside Air Blower Motor.
• Inside air unit is commonly mounted inside the cockpit or decking to provide forced, filtered air to the driver for cooling and to help prevent shield fogging.
• Spun aluminum cover prevents damage to filter assembly.
• Motor has two speeds and is recommended for 12 volt systems.

• Helmet Blower System.
• Remote mount breather system directs filtered, forced air to the driver's helmet for added comfort and safety.
• Motor assembly has a mounting bracket for easy mounting to chassis or seat back.
• 4 ft. helmet hose connects to most helmet fresh air intakes with standard 1-1/4" connector.
• The 9 ft. extension lead can be easily connected to a switched 12-16 volt source.
• This system weighs 2-1/4 lbs, and draws 3.5amps at 13.6 volts, and produces about 90 cfm of air to the driver.
• Provides more than enough air to keep the driver cool and shield clear.

• Helmet Vent Hose is 4 feet long
• Used to complete the connection between a driver air system and helmets equipped with a 1-1/4" barbed intake port.
• Two styles are available:
• ALL13004 is gray and constructed from a denser material to resist crushing and abrasions from rocks and debris
• ALL13021 is black and constructed of a thinner more pliable material which is less restrictive to the driver.