Shopping

• Countersunk Bolt Kit
• Specially designed washers which allow the socket head fasteners to install flush with the surface creating a smooth finished look
• Many uses include mounting roofs, side skirts, spoilers and replacing sharp edged fasteners inside cockpit
• Kit includes sets of washers, bolts and nyloc nuts
• Size: 1/4" x 1" with 1-1/4" OD washer
• Color: Black

• 5/8"-18 Thin OD Black Aluminum Jam Nuts
• Specialty jam nuts have smaller outside diameters allowing use of smaller wrenches when changing radius rod lengths
• Example: with 1/2" bolts the same 3/4" wrench can be used to adjust radius rod or mounting hole locations
• Available with Righthand or Lefthand thread
• Sold in Package of 4

• Thin OD Steel Jam Nuts, 5/8"-18
• Specialty jam nuts have smaller outside diameters allowing use of smaller wrenches when changing radius rod lengths
• Example: with 1/2" bolts the same 3/4" wrench can be used to adjust radius rod or mounting hole locations
• Available in Righthand or Lefthand thread
• Sold in Package of 4

• Universal Line Clamps
• 2-Piece aluminum clamps dress up wiring or hard line
• Available in 3/16" or 1/4"
• Sold in Package of four

Allstar recovery system caps allow coolant to exit the cooling system into an overflow or recovery bottle as coolant heats and expands. As the system cools, recovery system caps will draw coolant back in to keep the cooling system full. Non-recovery system caps allow coolant to exit the system, but do not draw coolant back into the system.

• Allstar round radiator cap
• 29-31 PSI
• Higher cooling system pressure raises the boiling point of coolant to reduce the risk of overheating
• Standard size caps fit 2-1/8" O.D. x 3/4" deep necks unless otherwise noted

Allstar recovery system caps allow coolant to exit the cooling system into an overflow or recovery bottle as coolant heats and expands. As the system cools, recovery system caps will draw coolant back in to keep the cooling system full. Non-recovery system caps allow coolant to exit the system, but do not draw coolant back into the system.

• Allstar round radiator cap
• 22-24 PSI
• Higher cooling system pressure raises the boiling point of coolant to reduce the risk of overheating
• Standard size caps fit 2-1/8" O.D. x 3/4" deep necks unless otherwise noted

Race and dyno proven air cleaners feature a low profile and free flowing design that creates more power over standard flat air cleaner assemblies. Kits include a high flowing dropped base with matching lid and a 1" sure seal spacer with an integrated O-ring for a positive seal on carburetors with a 5-1/8" neck. Kit also includes a pre-oiled washable element in choice of 3", 4", 5" or 6" height. Choose from plain or black coated finish lid and base. The 1" spacer included in this kit places the bottom of the air cleaner base 5/8" below carb neck sealing flange.

• 1-1/2" Drop/Raised Height
• 14" Diameter
• 5 1/8" Mounting Flange
• Washable Filter Style
• 3" Filter Height
• 1" Spacer Height
• Spacer Included

• Lightweight spun aluminum air cleaner kits have a flat base to increase air flow
• Kits include a lid, base and a 1/2" spacer with a built-in o-ring for a positive seal
• Popular in crate engine classes when every horsepower counts!
• Elements sold separately

• Inner axle tube seal
• Seal is pressed into the outer end of a 5x5 axle tube snout (2.5")
• Helps prevent differential lube from entering the outer wheel bearing area and contaminating grease
• Outer Diameter: 1.875"
• Inner Diameter: Approximately 1.325"