Shopping

Not sure if you turned your wheels the same amount each time when adjusting caster settings on your race car? Unless you have expensive turn plates, you’re never certain, until now.

• Wheel Caster Setting Plate
• This quick reference gauge positions under the upper ball joint nut, with markings facing up, to easily view.
• Place a mark on the shock body or fabricate an indicator to use as a reference point.

• Tie downs are great for securing vehicles and pit equipment during transport.
• 2" x 8' long straps have heavy duty plated hardware,
• Ratchet designed to hold excess strap material as it is pulled through and wrapped up during tightening.
• The working load limit is the maximum load a strap should be subjected to during normal use.

• 40 foot roll of spring steel
• Use to make braces when hanging body and fender pieces
• Hardened and tempered coil is 40' long x 1" wide x .062" thick

• Sipers quickly and precisely sipe tires for better traction.
• Units have adjustable sipe depth.
• Lightweight tool uses standard utility blades and is constructed for heavy duty use.
• These tools should be handled with care.

• Tie downs are great for securing vehicles and pit equipment during transport.
• 2" x 8' long straps have heavy duty plated hardware
• Ratchet designed to hold excess strap material as it is pulled through and wrapped up during tightening.
• The working load limit is the maximum load a strap should be subjected to during normal use.

• 13/64" Drill Bits
• A common size bit for working with 3/16" flange type rivets
• High speed steel bits have black oxide finishes and self-centering tips
• Flute length: 1-3/16"
• Overall length: 2-1/4"
• Sold in Package of 2

• Large Head 1-3/8" Quick Turn Springs
• .375" Reach
• 1-3/8" (.090" Wire Diameter)
• Sold in Package of 10

• Grind off the hardened outer “skin” on used dirt track tires and create round, aggressive sipes to increase traction.
• Use caution when handling and storing nail head disc, pins are needle sharp.

• Sipe tires quickly and effortlessly while maintaining precise control.
• Siping can greatly improve traction by allowing the tire to reach and maintain optimum temperature.
• A locking lever and blade clamping screw secures up to 13 blades in the head assembly.
• Blades can be easily positioned up or down to desired cutting depth.
• A built-in blade rail holds blade strips in place while individual blades are snapped away.
• Tool heats in 10-15 minutes.
• 110V plug in operation only.