Shopping

• Steel Clutch Plates For Bert Transmission
• Quality discs are a must when rebuilding the internal clutch of Bert transmissions
• Sold in Package of 5

• Aluminum steering wheel extensions fit between steering wheel and quick disconnect so the distance between driver and steering wheel can be adjusted. Includes fasteners.
• Steering Wheel Spacer .500"

• Allstar Valve Lash Wrenches save precious time and eliminate fumbling with two separate wrenches
• 9/16" Box Wrench
• 3/16" and 7/32" Allen Wrenches
• For use with stud girdle assemblies

• Impact type spring steel punch
• Spring steel punch places a 1/4" diameter hole 1/2" from the end of Allstar's 1" x .062" thick spring steel material
• Built-in stop positions material for accurate hole placement
• May be placed in a vise, or handheld and impact driven, using a 3/4" socket to punch spring steel mounted to race car

• Allstar 2" x 2" Square Tube Ballast Bracket.
• Ballast brackets are used for mounting ballast or components that need to be moved or adjusted easily.
• Black anodized two piece aluminum bracket clamps around tubing with recessed 5/16" socket head fasteners.
• Has a 1/2"-13 tapped hole on each side for a ballast mounting stud (sold separately).

• Bolt-on brackets ease installation
• Secure brake line adapters ALL50100-50103 with bolt-on or weld-on brackets
• Two 3/16" mounting holes
• Steel Bracket Material
• Sold as a pair

• Spool Cross Pin
• For GM 10-Bolt
• 7.5" Ring Gear

• Ensure that chassis tubing is level and plumb when building roll cages or checking driveshaft angles.
• Also works on trailing arms and suspension tubes when used with ALL10740 Smart Tool Tray.
• A "hold" button freezes and unfreezes readings which can be displayed as degrees, percentages, or in./ft. at the push of a button.
• Plus and minus signs indicate when pitch is more or less than that shown on the display. Pitch reads in 1/8 in./ft. increments.
• Listen and level emits an audible "beep" at level and plumb.
• The tool shuts off automatically if idle for more than six minutes.
• Powered by a standard 9 volt battery

• Starter Solenoid Black
• Ford-style solenoid is perfect for use with high torque racing starters.
• Flat base eases mounting, and a remote under-hood starter switch or timing light hook-up can be easily adapted.
• Solenoid is offered separately, or may be ordered with installation kit (ALL76202), that includes wiring, terminals and hardware.