Shopping

• Outside circumference: 33.08 in.
• Top width: 0.41 in.
• High quality, OE replacement
• Type: High Capacity V-Belt.
• Location: Power Steering And Water Pump
• Product Fit: Direct Fit

• Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
• Neoprene body provides protection against grime, grease, oil and moisture
• Nylon tooth facing provides a durable wear surface for long service life
• Maintenance-free, clean solution for roller chain drive conversion with no lubrication or retensioning required
• Type: Synchronous, Oil Resistant
• Pitch: 3/8 Inch
• Pitch Length: 32-1/4 Inch
• Number of Teeth: 86
• Width: 1/2 Inch
• Trade Number: 322L
• Belt Type: L
• Number of Toothed Sides: 1
• Tooth Profile : Trapezoidal
• Cord Material : Fiberglass
• Construction: Fiberglass Tensile Cord with Neoprene body
• Temperature Rating: -30 to 180 deg F (Operating)

Gates Power Grip Hose Clamps are maintenance-free clamps that retain dynamic tension and never need retightening. These heatshrink clamps conform to any shape and stop leaks, even on out-of-round applications. Clamp down better in all conditions and temperature extremes.

• Easy to install with ordinary heat gun
• Wider sealing area entraps connector bead
• Conform to any shape of hose and housing
• Made from a heat-sensitive thermoplastic with a memory to prevent over- or under-tightening
• Unique indicator tells you when clamp has shrunk to seal
• Temperature rating: -40°F to 302°F

• Next-generation Ethylene Elastomer body provides class-leading power capacity and temperature range
• Fiberglass tensile cord provides high strength, excellent flex life and high resistance to elongation
• Nylon tooth facing provides a durable wear surface for long service life
• Static-conductive (ISO 9563) and for conditions described in the Directive 2014/34/EU-ATEX
• Higher power-carrying capacity giving you the option to use a narrower belt
• No lubrication and less re-tensioning eliminates maintenance costs throughout the life of the belt.
• Pitch: 0.3150 in, 8 mm
• Material: Ethylene Elastomeric
• Number of Teeth: 75
• Color: Black
• Width: 0.787 in / 20 mm
• Pitch Length: 23.62 in / 600 mm
• Belt Height: 0.22 in / 5.59 mm
• Belt Section: 8M
• Cord Material: Fiberglass
• Nylon Teeth
• Maximum Temperature: +248°F / +120 °C
• Minimum Temperature: -40°F / -40 °C
• Single Sided

• Medium pressure hydraulic petroleum-based oil lines
• Applications: Power Steering, Air Brakes, turbocharger oil supplies, tilt cab cylinders, transmission coolant & filtration lines
• Black, oil & mildew resistant, polyester braid
• Reinforcement is one braid of high-tensile carbon steel wire over one braid of polyester
• Tube -4 & -5: black, oil & heat resistant synthetic rubber
• Meets or exceeds requirements of SAE 100R5 for traditional hydraulic applications
• DOT FMVSS 106-74 Type AII & SAE J1402 Type AII for air brake applications (-4 to -12)
• CAUTION: Intended for heavy-duty commercial vehicle use only

• Outside Circumference: 33.209"
• Top Width: 0.807"
• Number of Ribs: 6
• Meets or exceeds all specifications from the Original Equipment Manufacturer.
• Designed for small diameter pulleys, backside idlers, and for use with (or without) automatic tensioners.
• Special belt constructions eliminate belt noise, reduce tension loss, and solve problem drive applications.
• Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat resistant EPDM materials.
• Unique form grinding of each individual belt assures precise dimensional control.

• Sold priced by foot
• Push-on lock hose with textile braid reinforcement
• Available in blue or black (Blue shown)
• Variety of sizes, for AN fittings
• Temperature range of -55 to 300°F
• Maximum pressure rating up to 250 psi

• Outside Circumference: 37.125"
• Top Width: 0.807"
• Number of Ribs: 6
• Meets or exceeds all specifications from the Original Equipment Manufacturer.
• Designed for small diameter pulleys, backside idlers, and for use with (or without) automatic tensioners.
• Special belt constructions eliminate belt noise, reduce tension loss, and solve problem drive applications.
• Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat resistant EPDM materials.
• Unique form grinding of each individual belt assures precise dimensional control.

• Outside circumference: 37.08 in.
• Top width: 0.41 in.
• High quality, OE replacement
• Type: High Capacity V-Belt.
• Location: Power Steering And Water Pump
• Product Fit: Direct Fit