Shopping

• Regulates from 4-1/2 to 9 PSI
• One 1/2" NPT inlet & two 1/2" NPT outlet ports
• .437" (7/16") restriction
• Includes mounting hardware and AN style fittings
• Alcohol compatible

• Regulates from 4-1/2 to 9 PSI
• One -8 inlet port and four -6 outlet ports
• .437" (7/16") restriction
• Aluminum billet body and top casting cover are hard coat anodized
• Three fuel pressure gauge mounting options (fuel pressure gauge not included)
• Includes mounting hardware and AN style fittings
• Compatible for use with methanol/alcohol

• Tumble Polished Billet Look
• New Lower Housing Casting for Enhanced Fuel Flow & Quieter Operation
• Maximum Pressure 7 PSI
• Motor Draws 2 Amps Current
• 7 1/2 Amp fuse recommended
• Constant Fuel Flow with No Pulsation
• Flows 97 GPH (free flow)
• Flows 71 GPH at 4 PSI
• Regulator is not required
• Externally accessible pressure relief valve, max 7 PSI
• Rotor/Vane pump design is more tolerant of contaminated fuels
• Weighs only 2.88 lbs
• Includes mounting bracket
• Can be serviced from the pump end
• NOT compatible with alcohol or methanol fuels
• Use of safety shut-off switch, P/N 12-810, strongly recommended
• Not designed or recommended for use with fuel injection systems

• Tumble polished billet look
• New lower housing casting for enhanced fuel flow
• Motor draws only 3 amps current
• 7 1/2 amp fuse recommended
• Flows 110 GPH (free flow)
• Flows 88 GPH at 9 PSI
• Maximum pressure is 14 PSI
• Includes P/N 12-803 fuel pressure regulator
• Provides constant fuel flow with no pulsation
• Externally accessible pressure relief valve, max 14 PSI
• Rotor/Vane pump design is more tolerant of contaminated fuels
• Weighs only 3 lbs
• Includes mounting bracket
• Can be serviced from the pump end
• NOT compatible with alcohol or methanol fuels
• Use of safety shut-off switch, P/N 12-810, strongly recommended
• Not designed or recommended for use with fuel injection systems

• 3/8" NPT ports
• .220" (7/32") restriction
• High Pressure (4-1/2-9 PSI)
• Includes mounting bracket
• Chrome Finish

• 3/8" NPT ports
• .220" (7/32") restriction
• Low Pressure (1-4 PSI)
• Includes mounting bracket
• Chrome Finish

• Replacement fuel pump check valve kit
• For 12-801-1 "Red" electric fuel pump
• Includes lower gasket, check valve, spring and inlet screen filter

• Tumble polished billet look
• New lower housing casting for enhanced fuel flow
• Compatible with alcohol or methanol fuels
• Flows 140 GPH (free flow)
• Flows 120 GPH at 9 PSI
• Maximum pressure is 14 PSI
• 3/8” NPT inlet & outlet ports
•F uel pressure regulator is required (Recommend Holley P/N 12-704 for gasoline & P/N 12-707 for alcohol)
• Motor draws only 4 Amps current
• 7 1/2 Amp fuse recommended
• Provides constant fuel flow with no pulsation
• Externally accessible pressure relief valve, max 14 PSI
• Rotor/Vane pump design is more tolerant of contaminated fuels
• Weighs only 3 lbs
• Includes mounting bracket
• Can be serviced from the pump end
• Use of safety shut-off switch, P/N 12-810, strongly recommended
• Not designed or recommended for use with fuel injection systems

• This Holley mechanical fuel pump meets the fuel demands Small Block Chevy V8 engines
• Street Performance; compatible with gasoline
• Flows 80 GPH free flow
• Shutoff pressure pre-set 7.5 PSI
• Fuel pressure regulator is not required
• Heavy duty construction for continuous high rpm operation
• Fuel body casting can be rotated to accommodate various plumbing situations
• Inlet and outlet tapped for 1/4" NPT