Product Search

• PEM GM Metric Bearing and Race Kit with Seal for One Wheel
• REM Finished
• Polished bearings and races for GM Metric front hub (LM12649, LM12610, LM67048, LM67010)
• Two bearings and two races for one wheel - micro polished
• With standard hub seal
• Used in IMCA/USRA stock car classes and many other stock car racing series
• Common bearings for GM metric mid size cars 1978-1988

• Steel frame tab
• 90 degree weld-on
• Use to mount brake fittings
• Sold in 10-Pack

• New style torsion stop retainers - one of the most innovative designs on the market.
• Feature a knurled twist lock retaining system keeping arm and stop attached to the torsion bar.
• Insert into your torsion bar and torque to 25-30 ft/lbs.
• Has a holding power of more than 5000 lbs.
• Weighs a mere 2.5 oz.
• Install it or remove in seconds.

• Add strength and a smooth finish to hole edges.
• Unique tools can be used to punch and flare new holes, or to flare existing holes.
• Starting with a small center hole, the punch halves bolt together to cut and flare at the same time.

Stay cool and eliminate dust with the MAC Air helmet pumper! Whether you’re desert racing in Baja, cruising the dunes at Glamis, or hitting the short course track our MAC Air helmet pumper is a must-have for comfort and dust control. The MAC Air produces more pressure and more volume than any other helmet pumper available! It takes helmet air pressure to a new level.

The MAC Air utilizes a dual filtering system that increases performance and prevents premature clogging. Its external pre-filter features uniform micro openings that filter out most dust and debris before it can reach the internal filter. After race day, simply clean both washable filters with water, and you’re ready for the next event!

• Rocker Switch Variable Speed Controller (VSC) included - gives you quick, easy access to adjust air flow
• 1-3 foot expandable pumper hose
• Washable dry media air pre-filter
• Particulate pre-filter wrap
• Powerful high duty cycle life motor
• Waterproof power connector
• 12' power cord
• Includes Universal Bar Mount kit for easy mounting

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components.

• 40-micron fabric replaceable element.
• 3/8” NPT ports.
• Red, type II bright dip anodized finish.
• Compact size: 3.5” long x 1.25” diameter.

I deal for use with the Aeromotive Billet Pulse Pump, P/N 11207 and the Aeromotive Inline EFI Fuel Pump, P/N 11109.

An inexpensive insurance policy to protect your investment. Proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection with minimum restriction. For 200 – 3,000 plus HP applications, our filter assemblies offer unmatched flow, ease of installation and maintenance, along with the impeccable machining and finish you’ve come to expect from all Aeromotive components.

• High-flow, 10-micron fabric (fine) replaceable element.
• Flows 2,000 lb/hr with a pressure drop of less than 1 PSI.
• Compact size: 5.5” long x 2” diameter
• ORB-10 ports. Fittings available to adapt these filters to AN-10, -08 and -06 line sizes. (see Fittings & Adapters)
• All filter assemblies feature an O-ring for positive sealing in high pressure applications.
• CNC-machined from 6061-T6 aircraft aluminum.
• Bright dip red anodized finish for a corrosion resistant, show car quality appearance.

10-micron filters may ONLY be used after the fuel pump to protect your injectors or carburetor.
Fabric elements not suitable for use in E85 or alcohol applications.

• Measures 30.5"L x 12.5"W x 12.5"H This size allows for a wide range of tire combinations, such as four 7.1" rear tires, four rain tires, or six 4.5" front tires. Alternatively, you can fit one full set of tires (front and rear) plus an extra front (which can be handy if you know that the track likes to eat one of the front tires). Make your own combination! High-quality Nylon Fabric Our nylon fabric is strong yet lightweight, allowing the bag to withstand the rigors of track use while not being too cumbersome or heavy. Throw your tires in without having to worry about your bag's durability or its weight. Affordability the very first time that you stuff up to six tires in this bag, and find that you never want to transport six tires without a tire bag again, our bag would have paid for itself! And that's because it's incredibly affordable while being incredibly practical and beneficial at the same time. There are certain things that simply provide such great value for money that you'd be foolish not to buy one (a hammer comes to mind). For karters, a tire bag should be considered one of those things.

• High-quality Nylon Fabric 
• Carries 1 full set of Kart Tires
• 30.5"L x 12.5"W x 12.5"H

• Enough parts for almost any car - midget to Sprint Cup car (order caliper fittings separately)
• Stainless steel braided Teflon line with permanently swedged fittings installed on both ends to help eliminate spongy pedals
• Use with any brake fluid
• 2500 psi working pressure
• Note: NOT For Street Cars - Minimum Bending Radius 2"
• Kit Includes:
Braided Brake Lines
-Outside Material: Stainless steel braided
-Inside Material: Teflon® lined hose
-Hose Size: #4 AN
-Ends: #4 AN female
-Length 1: 18" (2 each)
-Length 2: 24" (2 each)
Hard Lines
-Material: Steel
-Size 1: 3/16" x 8" (3 each)
-Size 2: 3/16" x 20" (3 each)
-Size 3: 3/16" x 40" (4 each)
Fittings/Hardware
-Union: 3/16 IFF x 2 (4 each); #4 AN x 3/16 IFF Red with nut (4 each)
-Tee: 3/16 IFF x 3 (2 each)
-Frame Tab: 90º (4 each)
-Adel Clamps: 3/16" (12 each)