Product Search

PennGrade motor oil, formerly known as Brad Penn, has been endorsed for decades by racers, engine builders, and manufacturers. These high-performance oils deliver excellent shock load and temperature protection to engine parts for both racers and every day drivers.

• SAE 30W High-Performance Motor Oil
• Film strength/protection under demanding torque
• Anti-foaming, stability and high temperature protection
• Detergent/dispersant additives for engine cleanliness
• Oxidation and foam inhibitors to protect against thermal degradation, air entrainment

The result is reduced internal friction, strong anti-wear, and increased horsepower.

Aeromotive recommends annual inspection and service of filter elements. This includes replacing 10-micron fabric elements and cleaning or replacing 100-micron stainless steel elements. Severe duty applications or newly installed systems may require more frequent maintenance.

For Filter P/N’s: 12310, 12311, 12360

• MPI Polyurethane Center Pad For All F Models
• Perfect for Off Road Racing
• Dirt Friendly / washable
• Weight: 0.26 lbs – 120 g
• Fits only: F-13, F-14

• Clint Hatlestad designed 5'' coil over kit is a lightweight aluminum and plastic design that now aligns the spring on the OD.
• Kit comes with jam nut to ensure that the adjuster nut doesn't spin.
• Coil over kit for the Integra shocks.
• Does not come with shock body snap ring.

• Small And Big Block Chevy
• For 153-Tooth/168-Tooth Flywheel Straight Mount
• 11:1 Compression Ratio
• 160 Ft. Lbs. Torque
• 6:1 Gear Reduction
• 1.4kw
• 1.7 HP
• 7.4 Lbs.
• Natural Finish

• Higher output with 530 primary volts and 135mJ of spark energy
• Efficient components use less current to produce more power
• Same bolt pattern as the original 6AL with a lower profile housing
• Built-in LED for system checks
• All wires exit the same side through a locked, sealed connector
• Compatible for 4, 6 or 8-cylinder engines
• Secondary Voltage: 45,000 Volts
• Spark Series Duration: 20 degree Crankshaft Rotation
• RPM Range: 15,000 RPM with 14.4 Volts
• Voltage Required: 12-15 Volts, 7 Volt Start
• Current Draw: .7 Amp per 1,000 RPM
• Weight and Size 1.7 lbs., 8"L x 4"W x 1.825"H

• Pivot kit for most SA2010 Simpson Helmets
• NOTE: Does NOT fit SA2010 Simpson Bandit, Super Bandit, Carbon Devil Ray or K-10 Helmets

TruForm Wheel Covers are made from a high impact Aluminum which can withstand some of the harshest racing environments. TruForm covers are available in two styles. The non-vented is a solid cover and is the more traditional style. The vented style has sleeves to allow airflow into the rim in an attempt to cool the tire down for better performance and tire wear. Whether you race Late Models, Modifieds, Sprints, or Street Stocks we have a wheel cover for you!

• 15" Polished Aluminum vented wheel cover
• Truform's aluminum wheel covers are designed for use with 5/16" or 1/4" bolts
• Bolt kit is included
• Fits most 15" beadlock wheels and non-beadlock wheels with a cover ring (ring sold separately)
• These covers are great for Late Models, Modifieds, Sprints, or Street Stocks
• Developed by the racer, for the racer!

PennGrade motor oil, formerly known as Brad Penn, has been endorsed for decades by racers, engine builders, and manufacturers. These high-performance oils deliver excellent shock load and temperature protection to engine parts for both racers and every day drivers.

• SAE 60W High-Performance Motor Oil
• Film strength/protection under demanding torque
• Anti-foaming, stability and high temperature protection
• Detergent/dispersant additives for engine cleanliness
• Oxidation and foam inhibitors to protect against thermal degradation, air entrainment

The result is reduced internal friction, strong anti-wear, and increased horsepower.