Gauge & Switch Accessories

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

• Versatility of fitting diameters 1/2" to 1-1/4"
• Convenient hook & loop designed edges
• Withstands 500°F direct continuous/2000°F radiant heat
• No need to remove wires and hoses
• Easily trimmed to length
• Fireproof
• 1/2” to 1-1/4” diameters x 3 foot length

• Battery Disconnect Switch, Heavy-Duty, i.e. Oval Track, RVs, Street Applications, Drag Cars with Alternators, multiple battery applications, etc.
• Rating: 175 amps @ 6-36 volts DC
• Easy to install
• Required by many sanctioning bodies
• A quick twist of the non-slip handle shuts off all electrical current to the electric fuel pump, electric water pump, ignition, instruments, etc.
• For drag racing vehicles, the switch should be mounted on the vehicle's rear panel for easy accessibility
• For oval track and road racing applications, the switch should be mounted so that it can easily be reached by the driver or service personnel from outside the vehicle
• In street applications, the switch can be hidden to thwart car thieves
• Use Push/Pull Switch Kit No. 74105 for remote installation for Nos. 74100 & 74101

• Wire like the Pro's
• Seals out dirt and water
• Everything you need is included, plus an extra pin just in case

Specifications
Connector Material: Plastic
Quick Disconnect: Yes
Pins Included: Yes
Seals Included: Yes

• Required for safe removal of pins from Weather Pack housing
• Tool Material: Steel
• Handle Material: Plastic

• Rubber offset gauge grommet isolates the gauge from engine vibrations
• Provides tight, lightweight solution to holding gauge in place
• Grommet moves gauge 3/4" towards the driver to give more room behind the gauge
• Designed for 2-5/8" gauges, mounting panel will need a 2-3/4" hole for correct tolerances
• Great for Sprint car drivers

• Includes 3ft of #4 braided stainless steel line, firewall pass through grommet, 1/8" NPT female right angle to -4AN male fitting, -4AN male to 1/8" NPT male fitting, -4AN male to 1/8" NPT female fitting, 1/8" NPT to 1/4" NPT adapter bushing.
• Recommended for use with fuel pressure gauges.
• For use with mechanical pressure gauges and for remote mounting of electric gauge pressure senders.

• Wire Terminal Kit
• Terminal kit with a generous supply of the most commonly used connectors for automotive wiring.
• Sturdy plastic case with divided compartments helps keep connectors organized.
• Included in Kit:
- 22-16 gauge: (15) Butt Connectors, (15) Ring Terminals #10, (15) Female
- 16-14 gauge: (15) Butt Connectors, (15) Ring Terminals #10, (15) Female Blade, (15) Male Blade, (15) Spade
- 12-10 gauge: (15 Butt Connectors

• Weather Pack Starter Kit
• Weather Pack connectors are designed for harsh weather conditions.
• Originally used by top vehicle manufacturers, these connectors have proven reliable in many common applications requiring a weather-proof connection.
• Snap lock feature assures positive connection and allows connector to be easily separated as needed.
• Connectors are rated up to 20A at 12v DC.
• Kit includes:
(1) 1 Pin Tower Housing
(1) 1 Pin Shroud Housing
(2) 2 Pin Tower Housing
(2) 2 Pin Shroud Housing
(1) 3 Pin Tower Housing
(1) 3 Pin Shroud Housing
(1) 4 Pin Tower Housing
(1) 4 Pin Shroud Housing
(1) 6 Pin Tower Housing
(1) 6 Pin Shroud Housing
(40) Seals (20 Blue/20 Green)
(40) Terminal Pins 16-14GA (20 Male/20 Female)
(1) Pin Removal Tool
(1) Carrying Case

• Weather Pack Master Kit
• Weather Pack connectors are designed for harsh weather conditions.
• Originally used by top vehicle manufacturers, these connectors have proven reliable in many common applications requiring a weather-proof connection.
• Snap lock feature assures positive connection and allows connector to be easily separated as needed.
• Connectors are rated up to 20A at 12v DC.
• Kit includes:
(3) 1 Pin Tower Housing
(3) 1 Pin Shroud Housing
(4) 2 Pin Tower Housing
(4) 2 Pin Shroud Housing
(3) 3 Pin Tower Housing
(3) 3 Pin Shroud Housing
(2) 4 Pin Tower Housing
(2) 4 Pin Shroud Housing
(2) 6 Pin Tower Housing
(2) 6 Pin Shroud Housing
(100) Seals (50 Blue/50 Green)
(100) Terminal Pins 16-14GA (50 Male/50 Female)
(1) Pin Removal Tool
(1) Carrying Case