Shop Tools

• Repair or enlarge tapered holes to accept tie rod ends or ball joints
• Reamers may be used in a drill with a 1/2" chuck by removing the T-handle
• Large Diameter is 1" and Small Diameter is 7/16"
• 7.15 Degree
• 1-1/2" taper per foot

• Repair or enlarge tapered holes to accept tie rod ends or ball joints
• Reamers may be used in a drill with a 1/2" chuck by removing the T-handle
• Large Diameter is 1-1/8" and Small Diameter is 3/8"
• 9.56 Degree
• 2" taper per foot

• GM lower spindle checker tool kit, 2" taper
• Assures correct alignment of the upper and lower ball joint when checking for bent spindles
• Insert slugs into spindle and guide rod will fit through slugs if spindle isn't bent
• Kits fit most aftermarket race and GM stock metric spindles

• Chrysler lower spindle checker tool kit, 1-1/2" taper
• Assures correct alignment of the upper and lower ball joint when checking for bent spindles
• Insert slugs into spindle and guide rod will fit through slugs if spindle isn't bent
• Kits fit most aftermarket race and GM stock metric spindles

• For use on 6-48V DC systems
• Used to detect voltage, power, ground and circuit integrity
• LCD display provides a ‘no guess’ voltage value of the circuit
• Backlit LED indicates green for ground or red for power
• Provides 1-handed operation of CT & digital display of a multimeter
• One hand free to jiggle wires, replace fuse, or operate a switch
• Surge protected circuitry
• Computer safe<10mA circuit draw for confident testing

Straight Cut Aviation Snips
• Meets or exceeds federal ANSI/ASME spec B107.16-1998
• Chrome molybdenum steel construction
• Induction hardened, serrated edged blades
• Compound leverage cutters
• Cuts cold rolled and stainless steel
• Ships on re-usable holster package

Right Cut Aviation Snips
• Meets or exceeds federal ANSI/ASME spec B107.16-1998
• Chrome molybdenum steel construction
• Induction hardened, serrated edged blades
• Compound leverage cutters
• Cuts cold rolled and stainless steel
• Ships on re-usable holster package

Left Cut Aviation Snips
• Meets or exceeds federal ANSI/ASME spec B107.16-1998
• Chrome molybdenum steel construction
• Induction hardened, serrated edged blades
• Compound leverage cutters
• Cuts cold rolled and stainless steel
• Ships on re-usable holster package

Self Adjusting Wire Stripper
• Automatically adjusts to strip 24 - 10 AWG wire and cable
• Crimps 22 - 10 AWG insulated and non-insulated wire terminals
• Crimps 7 - 8mm ignition terminals
• Wire cutter
• Comfortable TPR hand grips