Brake, Clutch & Gas Pedals

• Bracket Kit - Wilwood Tandem Master Cylinder to Single Pedal Adapter
• Kit includes bracket, pushrod, boot, and hardware.
• Aluminum construction, Black anodized finish.

Wilwood’s Adjustable Forward Mount Pedal Assembly combines the brake and clutch pedals together in one unit and positions the master cylinders outside the firewall. It features all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Also included with the assembly: mounting studs, hardware, new clevis and pivot pin balance bar assembly to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. With a 6.25 to 1 pedal ratio on both clutch and brake pedals.

• Aluminum forward swing amount pedal assembly
• Adjustable triple master cylinder
• Includes adjustable brake balance bar
• Fully adjustable aluminum pedal pads with waffle style non-slip surface
• High strength forged aluminum ladder style pedal arms
• Brake and clutch pedal have 6.25:1 ratio
• Both pedal lengths are 12.05"
• Easy mounting location with full interchangeability with Wilwood pedals of the same type and style
• Includes mounting studs, hardware, new clevis and pivot pin balance bar assembly

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

• Aluminum reverse swing amount pedal assembly with Black E-Coat finish
• Adjustable triple master cylinder
• Includes adjustable brake balance bar
• Fully adjustable aluminum pedal pads with waffle style non-slip surface
• High strength forged aluminum ladder style pedal arms
• Brake and clutch pedal have 6.25:1 ratio
• Both pedal lengths are 11.89"
• Mount length is 12.22"
• Easy mounting location with full interchangeability with Wilwood pedals of the same type and style
• Includes mounting studs, hardware, new clevis and pivot pin balance bar assembly

• 2 Lb Residual Valve eliminates excess pedal travel
• All billet design keeps your brake pads close to your rotors so driver does not have to pump the pedal
• -03 AN Male end will thread right into master cylinder
• 1/8" NPT Female end allows you to easily plumb the brake system
• Black anodized finish
• Comes with a brass crush washer

• Standard universal gas pedal assembly with angled plate
• Nylon roller installed
• Constructed of high-quality tubular steel
• Custom built for racing
• Black powdercoat finish

• Swing mount pedal mounts two single outlet brake master cylinders in reverse position inside the firewall
• Features a lightweight aluminum frame
• High strength reinforced I-Beam style forged 6.25:1 ratio pedal arm
• Non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance
• Balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness
• A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation
• Balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments
• Accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size
• Pedal Length: 11.71
• Mount Length: 12.06

• Swing mount pedal mounts two single outlet brake master cylinders in reverse position inside the firewall
• Features a lightweight aluminum frame
• High strength reinforced I-Beam style forged 5.1:1 ratio pedal arm
• Non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance
• Balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness
• A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation
• Balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments
• Accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size
• Pedal Length: 10.14
• Mount Length: 11.04

• Material: Titanium
• Finish: Bare
• Sold Individually
• Fits Maxim and Eagle Chassis

Kits contain all components to install:
• One brake rotor / Hub assembly including hub seal
• Inner Bearing
• Outer Bearing
• Locknut Kit
• Dust Cap
• Bearing Kit for Metric Hub 1979-81