Wheel & Tire Accessories

Manufactured from rugged Grade 8 steel to withstand the extreme loading placed on today's racing tires
Self-tapping screws feature a built-in washer face for maximum holding strength.

• Wheel Rim Screws 1/4" Diameter X 3/4" Length
• Finished in gold iridite
• Use with 3/8" Socket
• Sold 35/Package
• NOTE: Drill Wheels with 13/64" drill bit - do not drill oversize

MPD Racing’s new Axle Spacer System utilizing a Split Cone Spacer Allows you to move the wheel in or out without going to your jack handle looking for the right size spacer. Once you have the spacing correct you simply move the existing spacers from the inside of the wheel to the center of the split cone or vise versa.

• Kit includes: Split Cone, (2) 1/4" spacers & (2) 1/2" spacers
• Most cars will require an additional spacer between the System & the Birdcage

Tire hardness has a huge affect on your car's performance. A tire too hard won't bite and a tire too soft may wear quickly or even ball up. Also tire hardness changes during its life cycle. To run your best you must keep track of all your tire's hardnesses. This easy-to-use tool will help you do just that - quickly, accurately & easily.

• Reads from 0-100 points
• Comes with silver carrying case and pouch
• For the most consistent results rock the durometer from angled back past straight up to angled forward. The pointer will move up to the highest (true) reading, then back down. Record the highest reading reached.

• Makes a finer line, easy to read
• Mark tire sizes, pressures, etc.
• Silver marking won't come off from heat

** Clearance Priced - While Supplies Last **

• Super accurate digital caster/camber gauge reads to .1º (1/10º) camber & .1º caster as high as needed
• Comes with QuickSet™ adapter & silver carrying case
• AccuLevel™ digital readout can be removed & used separately as digital angle finder for suspension, spoiler angles & many other things
• Includes Silver carrying case

Specifications
Caster Camber Gauge
Housing Material: Billet Aluminum
Finish: Red anodized
Camber Increments: .1°
Positive Camber Adjustments: 0 to +90°
Negative Camber Adjustments: 0 to -90°
Caster Increments: .1°
Positive Caster Adjustments: 0 to +90°
Negative Caster Adjustments: 0 to -90°
Backlit Display: Yes
Bubble Level Included: Yes
Bolt Size: 5/16"-18
Adapter
Style: Dunlop™ style
Wheel Range: 12" - 17"
Material: Billet Aluminum
Finish: Black anodized

• Tire tape stagger tool allow you to check stagger easily and accurately
• Tape Width: 1/4"
• Tape Length: 10 feet

• Easy to read backlit LCD display
• 90 second auto-off function
• Four units of measure: PSI, bar, kPa, & kgF
• 20" swivel hose
• Inflation range: 0-174 PSI
• Max inlet air supply: 232 PSI
• Inlet thread: 1/4” Female BSP

• Quickest & simplest way to measure toe-in
• Magnets hold the tapes in place while you work
• Rest one of these plates against the tire on each side & measure toe directly using 2 tapes
• Formed design is rigid for accuracy
• Stays put against the tire
• Tapes included
• Dimensions: 23 1/2" x 9"

• Bolt-on style 15" wheel mud cover ring
• Designed to allow wheel covers to fit in universal applications
• Strong, steel construction
• Natural silver finish for a sleek, professional appearance