• Mini Sprint Sprocket/Chain Guide Block (Only) • Material: Nylon • Total Weight: .2 lbs
• Mini Sprint Rear Axle Spacer Kit • For use with 1-7/8" Axles • Polished Aluminum • Kit includes 11 spacers total - 6 standard & 5 tapered
- Standard Spacers: • (2) 1/4" Standard Spacer • (2) 1/2" Standard Spacer • 3/4" Standard Spacer • 1" Standard Spacer • Tapered Spacers: • (2) 3/4" Tapered Spacer - (2) 1" Tapered Spacer - 2" Tapered Spacer
TRU-SQUARE will save you time aligning your rear end; but, with the rear end firmly secured in position, you can also work on other parts of the car at the same time, without fear of knocking the rear end out of square.
There are three (3) different TRU-SQUARE tools for Mini/Micro Sprints depending on your axle. Here are directions to find out which tool you need:
Set your rear axle on your setup blocks of choice. Be sure your spacers are on and your rear axle nuts are tight so the birdcages are not loose.
The TRU SQUARE tool clamps to the axle directly above the setup blocks, therefore the tool that is needed is determined by the overall diameter of the axle or axle spacer (if applicable) at this location. Measure the diameter of your rear axle or the diameter of the spacer (if there is a spacer on the axle) directly above the set up blocks. Your measurements should be:
• 2" (on both sides) • 2.5" (on both sides) • 2" on one side and 2.5" on the other
• Quick Gear Change Tray • Makes changing gears faster and easier • Lightweight aluminum construction • 13 X 6¼ X 2¾