Shopping

• 10.5" x 1 1/8"-10 spline GM
• Solid center hub
• 6 paddle design
• Metallic friction material
• 4 lbs.

• CNC-machine billet steel lightweight flywheel
• Work with 10.5" B&B or diaphram style pressure plates
• Internally balanced
• 2 pc rear main seal
• NOTE: Only works with solid disc clutches
• Uses ARP-100-2901 flywheels bolts
• Weight: 10 lbs

• 10.5" single clutch disc
• Organic disc for single disc pressure plate
• Full face design with solid hub
• 1-1/8"-10 Spline
• 2.5 lbs

• Ram 70 Series replacement clutch disc
• Riveted pad friction disc
• .315" thick
• 1-1/8" diameter shaft, 10-Spline
• 6.25" diameter disc
• Designed for circle track applications

• Designed for circle track stock applications
• Floating design - installation is simple & quick
• Bearing requires minimum 3/4" bore master cylinder & -03AN feed line to run from master to bearing
• GM Hydraulic bearing assembly
• Includes bleeder kit
• Utilizes 1.375" transmission collar size
• 1-3/4" Compressed length with .700 travel

• 10.5" Lightweight Stock Clutch Assembly, Pre-1986 GM
• Set includes pressure plate, disc, flywheel, pressure plate bolts
• 12 pound steel flywheel internal balance
• For 2 pc. rear main seal engines
• Organic solid hub disc 1 1/8-10
• All steel pressure plate assembly
• Requires 530 flywheel bolt set
• 26.5 lbs.

• 10.5" Lightweight Stock Clutch Assembly, Pre-1986 GM
• Lightest set RAM offers!
• Set includes pressure plate, disc, flywheel, pressure plate bolts
• 10 pound steel flywheel internal balance
• For 2 pc. rear main seal engines
• Organic solid hub disc 1 1/8"-10
• All steel pressure plate assembly
• Requires 530 flywheel bolt set
• 24.5 lbs.

New HD versions offer the upmost in durability and long life over factory hydraulic systems. Full adjustability means easy setup with any aftermarket clutch, single or dual disc.

• Designed for circle track stock applications
• Floating design - installation is simple & quick
• Bearing requires minimum 3/4" bore master cylinder & -03AN feed line to run from master to bearing
• GM Hydraulic bearing assembly
• Includes bleeder kit
• Utilizes 1.375" transmission collar size
• 1-3/4" Compressed length with .700 travel

• Hydraulic Bearing Replacement o-ring set
• Replacement o-ring set for hydraulic bearings with a 2.250" housing diameter
• Works with Ram Part# 78125 GM Hydraulic Throwout Bearing