Spark Plugs, Wires & Tools

• Dragon Fire High Performance Sport Series Ignition Wire Set
• Extra thick, flexible silicone outer wire jacket for maximum protection up to 600°F
• 10 mm diameter with 150 ohms/ft resistance
• Black water tight, extra thick silicone 90° boots with 600°F temp rating and Smiley's logo
• Application: V8 under header/HEI
• Ferrite coated spiral wound conductor
• Wire Color: Red

• Nickel alloy tips - available in standard or projected tip
• Pre-gapped with copper core
• Non-resistor with 2.6 mm electrode
• Click on Spark Plug Specifications download below for plug details & cross reference information
• Last digit of item number represents the temperature - lowest number is hot, highest is cold
• Each box contains 4 plugs
• Lowers ignition system voltage requirements
• Greater ignitability & performance over conventional spark plugs
• Anti-corrosion & anti-seizing properties

• Absolutely the best way to route spark plug wire through the firewall
• Designed to prevent voltage leaks in passenger compartment mounted coil installations
• Molded from Rynite® & nylon
• Provides 1/2” of insula­tion to ensure that the coil’s spark reaches the distributor

• Dragon Fire High Performance Street Series Spark Ignition Wire Set
• Extra thick, flexible silicone outer wire jacket for maximum protection up to 600°F
• 8.5 mm diameter with 500 ohms/ft resistance
• Black water tight, extra thick silicone 135° boot with 600°F temp rating
• 9.5" length for factor coil location
• Ferrite coated spiral wound conductor
• Application: GM LS engines
• Wire Color: Blue

• Dragon Fire High Performance Street Series Spark Ignition Wire Set
• Extra thick, flexible silicone outer wire jacket for maximum protection up to 600°F
• 8.5 mm diameter with 500 ohms/ft resistance
• Black water tight, extra thick silicone 135° boot with 600°F temp rating
• 9.5" length for factor coil location
• Ferrite coated spiral wound conductor
• Application: GM LS engines
• Wire Color: Silver

• Dragon Fire High Performance Street Series Spark Ignition Wire Set
• Extra thick, flexible silicone outer wire jacket for maximum protection up to 600°F
• 8.5 mm diameter with 500 ohms/ft resistance
• Black water tight, extra thick silicone 135° boot with 600°F temp rating
• 9.5" length for factor coil location
• Ferrite coated spiral wound conductor
• Application: GM LS engines
• Wire Color: Red

• Small Block Chevy Spiral Core Sleeved Wire Sets
• 8 mm 800 ohm Spiral Core Wire pre-terminated at both ends
• Complete, pre-assembled ready to install sets with 36" coil wire
• Each wire is tested for continuity and resistance after termination to ensure race-ready performance
• High-temp silicone 90° Black spark plug boots provide maximum heat protection
• Shrink tubing at each ends completes the wire-to-boot sealing
• Numbered ID tags simplify installation
• Application Options: Over Valve Cover or Under Header
• Distributor Cap Style: HEI or Non-HEI
• Insulating sleeve runs the entire wire length, adding 8,000 volts of additional insulation
• Available in Black, Red or Blue with Smiley's logo on connector

Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F.

• Pliable for tight bends
• Capable of withstanding 500°F direct / 2000°F radiant heat
• Five popular diameters to choose from
• Trim to desired length

Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.

• Versatility of fitting diameters 1/2" to 1-1/4"
• Convenient hook & loop designed edges
• Withstands 500°F direct continuous/2000°F radiant heat
• No need to remove wires and hoses
• Easily trimmed to length
• Fireproof
• 1/2” to 1-1/4” diameters x 3 foot length